Pressure Reducing Valve

Pressure Reducing Valve, as the name recommends, controls the pressure of the water coming from municipal's water source to our water pipe line. It keeps the pressure in such a way that is not damaging for our expensive equipment’s. It is being made with sturdy and durable material so that it can simply withstand with the high pressure force it is constantly under.

A spring actuated valve system, which is built inside the PRV (pressure relief valve), is used to manage the pressure inside the system. This spring actuated valve system is connected to diaphragm. The diaphragm utility is to control the flow of liquid in the pipe line. It thoroughly maintains the preset pressure

The water that comes from municipal's water basis pushes against the diaphragm and the spring's work is to force the diaphragm back the other way. This procedure doesn't let the water come out with as much pressure as it enters in pipe line.

You can also control increase or decrease the water pressure as per you requirements. To do so first you have to loosen the lock nut. After losing the nut, turn the screw circular in increment position to increase the water or if you want to decrease the pressure, simply turn the screw left-handed in increment position. Make sure to tighten the nut after reaching your desired water pressure

Typically pressure relief valves are designed and installed to prevent such breakage from causing harm to a system or site.

Requests connecting liquids or gases could benefit from the use of such valves. The valves can be adjusted to a certain pressure point. So, if the pressure breaches its set point, the valve will permit the over pressurized steam, gas, or liquid to flow through a small opening to prevent a total system failure or blast.

Exchanging pressure settings: The market offers a special selection of rupture-pin based valves that are very relaxed to use. If the pressure levels have been breached and there is harm to valve, a simple visual inspection will be enough to identify it. Such valves can also be fitted with optional features such as a pin guard cage, a proximity sensor, and a flush port that benefits clear lost circulation material before resetting.

Repairs and replacement: Sometimes, repairs and replacement can not only be a prohibitively expensive method, but can also be very time consuming. It is possible to change the pressure levels of the valve by changing the size of rupture pins.