Ceramic Disc Valves

 At what time choose a sink Disc there is two main designs to select from. They are a ball Disc and a Ceramic Disc Valves. A ball Disc has a rounded ball shaped Right above the base of the Disc which allows it to move in a spherical direction. A Ceramic Disc Valves utilizes a more direct (and up-and-down movement to determine temperature and water flow. While they both may look similar, it is easy to tell the difference once you use the Disc. When comparing the two options there are four distinct benefits of selecting a Ceramic Disc Valves over a ball Valve.

The first feature which makes a Ceramic Disc so engaging is its functional lifetime. The discs in the Disc Valves are complete of Ceramic Disc Valves which provides a long lifetime because they are not a part that will suffer from normal wear and tear. If anything fails in the Ceramic it will be the small rubber inlet seals on the bottom. They may as well become clogged with mineral deposits from the water. Fortunately, they are simply replaced and cleaned. In theory, the ceramic discs can last a lifetime, however they normally need to be replaced every 25 to 30 years. This is an extensively longer lifespan when compared to the ball Disc which typically has a lifespan of 3 to 5 years at most.

An additional benefit of a Ceramic Disc Valves is it provides better safety for the water valve. Due to the design, water flows between the two Ceramic Disc seats rather than a rubber seal and water valve. As a result, the valve on the Disc is better protected. Better protection means a lower likelihood of corrosion or wearing out from daily use.

A third benefit of using a Ceramic Disc Valves is whenever a repair is required, the Ceramic is easily replaced. The Ceramic is fundamentally a self-contained system consisting of two Ceramic Disc Valves rotating on top of one another. As a result, when a part does wear out users can simply replace the entire Valves and install a new one. This makes Disc repair much easier because the entire Disc does not need to be disassembled. Additionally, no special tools are required to complete the removal and installation.

The final cause to use a Ceramic Disc is accuracy. Because the Ceramic Disc Valves Disc operates in only two directions (up/down and left/right) rather than a spherical direction to control water flow and temperature is easier to accurately gauge the temperature and flow of the water during use. It also makes it easier for users to independently adjust the flow and/or temperature as required.

Displaying 1 to 10 of 4446 listings in All Locations