Face Gears Company

When we hear the word "gear", the first thing that blazes in our mind is the one which is used in a motor bike to change the rapidity of motion. But that is not all. Face Gears are used anywhere and everywhere. Be it any mechanical device, be it the smallest wrist watch or be it the largest industrial Face gears which are of 5m diameter, they have a found wide range of applications. The most generally seen bicycle also works with the action of these machine-drivenFace gears. Face Gears generally work in pairs whose teeth would be non-divisible numbers. When one turns clockwise other would be in anticlockwise motion.

The number of teeth on theFace gears decides the gear ratio which is rather too important in an automotive industry. Gear ratio is related to the number of teeth on the meshing gears. It is expressed as mathematical ratio like 2:1, 3:2 etc. If the largerFace gear turns one revolution for every two revolutions of the smaller gear then the gear ratio would be 2:1.

These useful Face Gears Companyare manufactured using the metals like copper, brass, steels, cast iron and their alloys. The most primeval form of Face gear which is still in use is the wooden gears which are used in textile and flour mills. Face Gears Company manufacturing involves lot of materials and processes and thus proves to be expensive. So because of this reason gears have to be maintained properly.

The reason to have non divisible teeth on the gears is to avoid the wear of the face gears. If suppose the gears have 10 and 30 teeth each, then for every 3 turns of the first gear the largerFace gear would mesh with the same teeth and thus causes excessive wear on the gears. Keepingface gears also includes regular application of oil and other lubricants, regular cleaning with soft cloth, etc. The Face gear oils have improved a lot that provides greater protection to the component and keeps them well lubricated.

The face gears in a transmission are similar to the wheels in a crossed, belt pulley system. Abenefit ofFace gears is that the teeth of a gear prevent slippage.

While two Face gears mesh, if one face gear is bigger than the other, a power-drivenbenefit is produced, with the rotational speeds, and the torques, of the two gears differing in proportion to their diameters.

Displaying 1 to 10 of 49 listings in All Locations